, before 4610 to avoid component protection (CP) – In case you get CP and dealer can’t fix it –
Unless you have all the right equipment to update – leave it to the dealers to do it or you may brick your MMI Head Unit and it’s costly to replace. Don’t update software if everything is working, unless you have to when .
The software on mine is 1190 – latest is 4610 – The intermediate is 3360 where AMI is supported and NAV 10 also. Many people upgraded directly from 1190 to 4610, if you’re doing that way, then just use instead of the intermediate 4F0 906 961 AB.
1. Remove all the CD out of the CD changer.
2. Put in the update CD to CD1 (first slot).
3. Charge the battery or keep the engine running outside and NOT in the garage (CO poisoning).
4. Watch the Video below for a few times – After the update, you will , you will need a .
14 Comments
how do i turn off the speed warning 2 on my 2007 audi q7 if there is no option for instrument cluster? i really would like to turn off this warning it really annoying.
I’m not sure how you’re going to turn it off if the option is not there. Read the manual to see if there is any other way? You may have to use VCDS or OBDEleven to turn the option back on.