2015-01-10 The Amazing unit is still working.
2014-01-11 I’m tired of watching 1 or 2 mobile channels, I got a new tuner, stationary to watch many channels while waiting for my family shopping or attending events. Now I’m happy, I can watch sports or shows in the parking lot where the family shops.
So, I added FBAS to the Head Unit for the RVC retrofit, now I want to have TV OTA (Over The Air) when I need to. Ordered a Analog TV Tuner (4E0 919 146) and an ATSC MH Tuner and here it is. The system has to be tweaked somehow. The display on AV2 is BW and ony color when put in parking mode. The stereo is 5.1 channel from HD TV, it’s so beautiful with Audi Bose surround sound mode.
Anyhow, there is no ATSC tuner in Audi Hybrid tuner that costs 3 times the analog TV tuner. There is no mobile ATSC tuner in Audi Hybrid tuner, so it’s a waste of money to buy a hybrid tuner for ATSC (US) TV. Just buy an inexpensive ATSC + ATSC mobile tuner combo for less than $150 to tune with the Analog TV tuner. The best is to hook up a laptop to the TV tuner.
Adding the analog TV tuner is painless. Just plug it in using connectors from the Satellite Radio that we don’t use. The MOST bus actually adds the TV tuner to the CD list.
There are 3 connectors needed – 20 pins (left) custom make – MOST optical middle (from satellite connectors) – FBAS from RVC controller.
From the 20 pins pin out schematic – The brown is ground = pin 2, the Red/Black = pin 1, the Yellow/White = pin 3 (pin 3 is used to turn off the analog tv tuner when it’s not used).
20-PINS CONNECTOR CUSTOM WIRING.
If you can find a 20-pin connector any where, it should fit this 20-pin connector. I found 2 and they both work, so I made up 2 sets of cables. Solder the wires on the connector itself, make sure all the pin positions are correct. Follow the 20-pin connector pin diagram.
For power pins: 1,2,3 I got some male flat long pins and solder to the wires on the 20-pin connector. Connect Orange(pin1) to Red/Black(satellite), Purple(pin2) to Brown(satellite), White(pin3) to Yellow/White(sensor).
After hooking up everything correctly, everything should works as the video below. I bought the ATSC MH tuner, I should buy the ATSC + ATSC MH tuner combo which can tune HDTV stationary (like OTA for home) and ATSC mobile also. The ATSC MH tuner I have only tunes mobile channels which NOT many available at this time and MOBILE TV is DISTRACTING for driver which should not be used.
I also want to connect an old laptop to AV1. I do need the VGA to RCA converter.
TV Tuner Pins Out
The reason for BW on AV1 or AV2 is because the setup was PAL instead of NTSC.
18 Comments
Hi, thanks for this info, its so great! I use the bluetooth adapter to stream into the CDC on my C5 allroad.
What 20 pin connector is that? Where did you find it?
The 20 pin connector is in the Analog TV tuner inputs/outputs. You need the connector to connect to AV1 and AV2 and power to the Unit.
Yes I understand what its for but like where did you buy it? Or what cable did you hack it from?
If I would do another cable, I would buy this 20 pin power cable and wire it to my inputs/outputs AVs
Ah, yes ATX PS connector! Great idea…thank you so much!