10.6.8 combo update installation
Start laptop with iboot-legacy in the drive, select first boot – cd/dvd, it will load iboot-legacy bootloader, this time we will see the “snowusb1068” partition with 10.6.3 we just installed, select the partition and click enter, if it fails to boot for any reasons, we can use the “tab” key and type -v at the prompt, make sure to select “snowusb1068”, but I never have problem booting from the boot screen. We will be able to load 10.6.3 without any problem, we’re going to update 10.6.8 right after 10.6.3. First, in the 10.6.3 snow leopard (“snowusb1068”), we need to install UpdateHelper, THIS IS VERY IMPORTANT, install this first, RESTART and boot with iboot-legacy cd again and select “snowusb1068” (right now it only has 10.6.3 with UpdateHelper installed).
Reboot usb1068 using iboot-legacy cd then install 10.6.8 update.
Install 10.6.8 combo update package, make sure to select the “snowusb1068” partition.
When it finishes DON’T RESTART, leave the windows alone, we need to install Multibeast 3.8, but we don’t select easybeast only dsdt and individual options only. Multibeast will crash and closes both 10.6.8 update and multibeast screens, it’s OK, just restart the multibeast again, this time we can install solidly. Even with dsdt option selected, I found that we still have to select all the options for the 10.6.8 to boot correctly. Here are the options.
Finish with the multibeast installation, it will create an “Extra” folder in “snowubl1068” partition with all extensions and smbios.plist com.apple.Boot.plist and generic DSDT.aml. You can replace the whole “Extra” folder with my “Extra” folder or just the 3 files “dsdt patched and com.apple.Boot.plist” for the screen backlight to be controlled by a slider. After replace “Extra” or “files in Extra” folder, use Kext utility in the APPS folder to update the cache before reboot.
Make sure everything is correct and verified, we’re ready to boot snow leopard 10.6.8 with full QE/CI/CL and native resolutions straight from our USB external drive. If everything is correct, you will see the 1600×900 screen
60 Comments
Dog, great tutorial and videos. Before I give this a shot, I wanted to ask a few questions to make sure that this will work well for me:
1) Will this setup (once completed via dual boot option #2) be capable of using MacOSX’s Software Update utility to install future Snow leopard OSX updates, or will I have to stay at 10.6.8? (It’s no big deal, just curious if future updates for either Snow Leopard and/or Lion will require additional work to install on the laptop).
2) Is there any special tricks to backing up the dual boot system so that I can easily restore the entire setup without repeating all the steps again? In addition, would a single boot (MacOSX only) simplify the backup/restore significantly?
FWIW, I would like to use continue to use SuperDuper for my full backup/restores, and TimeMachine for my incremental ones… I am not opposed to using other software if necessary, mainly curious if superDuper would/should work for full backups/restores.
NOTE: My main concern is to have a simple restore solution in case the hard drive fails, be SUperDuper or some other package you recommend. I figure it’s important to know before starting since HDD manufacturer’s don’t make ’em like they used to 😉
3) Speaking of HDD failures, is this setup at all tied to the WDD 750GB drive? For example would I be able to upgrade to an SSD or hybrid in the future by doing a simple restore (sort of tied to question 2 in a way).
Thanks in advance, and again, great job on the tutorial.
I believe Snow Leopard ends @10.6.8, Lion is the new operating system and it doesn’t upgrade with hackintosh at all because we have to buy the OS @29$ on line.
Very good question, I haven’t thought of this yet, I backed up the hard drive BEFORE the Mac OS X installation using Windows 7 image back up. It doesn’t work after we installed Chameleon over the MBR. The best is to try Tom’s dual boot with Easybcd (which does keep the windows MBR), back up the windows images only.
This set up is for all Hard drives, but WDC750 seems to be the most problem ones. SSD, I have no idea.
I you install LION, it will upgrades well without doing anything, the only problem you will have is the AppleHDA.kext that needs to be removed before reboot for the VoodooHDA.kext to work.
It’s good that you do research before messing with the original Hard drive. That’s why I strongly recommend to install Mac OS X onto an EXTERNAL USB HARD DRIVE and back up all original Hard drive images.
Hi,
I have used this process, your process and it works great. There is one thing I noticed. Random crashes. Where I will just have to reboot. Strangely enough, i found these only happen when i use the Ethernet port. With wireless, it is rock solid. Is it possible i need a kext other than what you have here?
Thanks a lot.
Hello,
I haven’t used ethernet much to connect to the internet so I don’t notice the crashes. If the ethernet works, the kext you’re using is correct, when it crashes, it’s the software you’re running. Why not Lion?
Cheers,
Hi,
I am looking at your lion install and have created the bootable usb. Using LION 10.7.2 and MY Hack. But some of the instructions on what to do with the extra folder is confusing.
Also, I understand what you are saying about the kext. But I have been doing heavy multitasking and copying large files to and fro across the lan using wireless with 0 crashes. If I connect via Ethernet, then start a transfer across the LAN and say, browse the web. It will crash. I didn’t believe the results either.
Ooops BTW thanks for your timely response. And this site is great.
[…] Snow leopard 10.6.8 on lenovo g770 i5 sandy bridge laptop […]
1 Trackback or Pingback